Diving Compressors from Coltri

SMP are the official UK agents for Aerotecnica Coltri®.  We supply a wide range of Coltri compressors which are used for the purpose of supplying breathing air for diving.  Our diving compressors are available in a range of sizes and fuel variations to suit all breathing air applications from portable diving compressors to large filling stations.

Portable Breathing Air Compressors

We can offer a wide range of portable diving compressors in both petrol and electric variants capable of pumping breathing air at a rate of upto 100 litres per minute (3.5 CFM). The range includes:

Mid Range Breathing Air Compressors

When your breathing air requirements require a slightly bigger diving compressor, we have a wide selection of mid-range Coltri compressors to suit most refilling requirements.  The range includes:

Coltri Filling Stations

Our Coltri filling stations are capable of pumping breathing air at rates of upto 600 litres per minute (21 CFM) and are can fill multiple cylnders at the same time.  They are ideal for dive shops offering lots of cylinder refills.  The range includes:

Divex Ultrajewel 601 Helium Reclaim Helmets Added To Website

We have recently added the Divex Ultrajewel 601 Helium Reclaim Helmets to our website.

The Ultrajewel 601 range of Helium Gas Reclaim Helmets from Divex are the most efficient and reliable available to the commercial diver. When used with the GASMIZER reclaim system, gas recovery is typically 90% or better.

The combination of the Ultraflow 601 Demand Regulator and the Jewel 601 Exhaust Regulator has established this helmet as the industry standard for helium recovery operations.

The Ultrajewel 601 range of Helium Gas Reclaim Helmets from Divex have the following features:

  • CE Certified
  • Low work of breathing performance, compliant with NPD / HSE
  • Very efficient gas reclaim
  • KMB 17B or 17C variants
  • Industry standard

The Ultrajewel 601 range of Helium Gas Reclaim Helmets from Divex are available with the following options:

  • Divex Ultrajewel 601 17B Helmet
  • Divex Ultrajewel 601 17C Helmet
Divex Ultrajewel 601 Helium Reclaim Helmet

Divex Ultrajewel 601 Helium Reclaim Helmet

SMP Supply High Demand From Commercial Diving Contractors

In recent months, we have noticed a considerable increase in worldwide demand from commercial diving contractors for commercial diving equipment.

In particular we have been quoting a lot of commercial diving air systems for commercial diving contractors who require large diving equipment as a result of winning offshore diving contracts.  For example we recently received an order from Africa for a complete diving system including containerised hyperbaric chamber and air diving control panel, machinery container with HP and LP breathing air compressors and HP gas storage, hydraulic diver launch and recovery systems, Kirby Morgan diving helmets and Bandmasks.

As a member of both IMCA (International Marine Contractors Association) and ADC (Association of Diving Contractors), we are well known to commercial divers and commercial diving contractors wthin the UK, Europe and throughtout the world.  In the last 12 months we have fielded enquries from over 100 different countries throughout the world.

Our Facebook page contains over 4,000 commercial divers and commercial diving contractors throughout the world.  To view our Facebook page visit: SMP Facebook Page

OTS Guardian Full Face Mask

The OTS Guardian Full Face Mask is the most recent diving innovation from OTS.

Designed to meet the demanding needs of todays Commercial/Professional Diver, it leverages the best features found on other FFMs with unique features designed by OTS. The OTS Guardian Full Face Mask comes in the following color combinations (skirt/hardware): black/black, black/blue, black/red, black/pink, blue/black, and yellow/black.

A common problem with most full face diving masks on the market today is the seal. The lack of a good seal causes the diver to use air quicker and can interfere with the divers ability to hear if using underwater communications. With that in mind, the GFFM was designed around a double seal. This along with many other great features (i.e. semi positive pressure, quick release 2nd stage, easy maintenance, etc.) is why you will find the Guardian is the best bang for your buck when buying a full face mask. The OTS Guardian full face mask is fast becoming a standard with Search & Recovery, Law Enforcement, Commercial and Recreational divers.

The OTS Guardian Full Face Mask – A Better Mask

  • The OTS Guardian Full Face Mask was designed with a double seal, allowing for the comfort of both small and large faces.
  • Equalizing system which helps fit virtually all noses.
  • Variety of Colors are offered
  • Low profile (visibility is superb)
  • Hose comes off the right side (most preferred by divers)
  • Easily adjustable head straps & robust buckles.
  • Ambient Breathing Valve (ABV)
  • Easily removable 2nd stage regulator (great for storage and maintenance)

Features of the OTS Guardian Full Face Mask include:

  • Removable 2nd stage for easy cleaning and storage (can’t be used w/o mask)
  • Made of a one-piece, non-rigid silicone skirt combined with injection-molded, high-impact, glass-filled ABS plastic frame and regulator housing
  • A double face seal and slightly smaller oral nasal cavity to fit most faces
  • Equalization occurs through a nose block.
  • Air flow is directed up over the visor to eliminate fogging and through one-way valves in the oral nasal pocket to reduce CO2 retention.
  • 2nd stage comes off the right shoulder and uses a standard LP hose
  • Includes a communications port for easy installation of a Buddy Phone® or ear/microphone assembly to connect an OTS Diver Communications Unit such as the Aquacom® SSB-2010
  • Includes OTS’ Ambient Breathing Valve®, Mask Bag, and LP hose

For more information visit: OTS Guardian Full Face Mask

June 2012 Commercial Diving Equipment Newsletter

We have released the latest version of our commercial diving equipment newsletter.

Kirby Morgan 28B Band Mask

Kirby Morgan 28B Band Mask

To view this online please visit: June 2012 Commercial Diving Equipment Newsletter

Hot Crabber Diver Gloves

Lots of demand for Hot Crabber Diver Gloves at present.  These gloves are made from 100% cotton knitted liner for extra comfort.

  • Hot Crabber Diver Gloves have a Synthetic PVC/Nitrile coating providing extra protection
  • Hot Crabber Diver Gloves have strong resistance to chemicals, acids, alkalis, oils & petrol
  • Hot Crabber Diver Gloves are made from 100% cotton knitted liner for extra comfort
  • Hot Crabber Diver Gloves are shaped with curved fingers & fluted finger tips for better flexibility
  • Hot Crabber Diver Gloves have Multi-layer coating for extra protection
  • Hot Crabber Diver Gloves have Neoprene Gauntlet for extra comfort
  • Hot Crabber Diver Gloves are the commercial diver’s choice!

Hot Crabber Diver Gloves are available in Sizes 8 (M), 9 (L) & 10 (XL)

The original Hot Crabber commercial divers glove has been designed by Life Support Engineering from commercial divers feedback. Made using a high quality multitop glove with a neoprene gauntlet sewn on for extra comfort and compatibility with hot water suits.

For more information please visit: Hot Crabber Diver Gloves

Hyperbaric Chambers Video

We have created a video of our hyperbaric chambers using a collection of professional photos Hyperbaric Chambers Manufacturer UK

60" Twin Lock Hyperbaric Chamber

60" Twin Lock Hyperbaric Chamber

For more info on our manufactured hyperbaric chambers please visit: Hyperbaric Chambers

Interpsiro Divator Full Face Mask

Interspiro Divator Full Face Mask

Interspiro Divator Full Face Mask

SMP sell a range of full face diver masks including the Interspiro Divator MkII full face mask.  Commonnly referred to as an Aga Mask, the Interspiro Divator is one of the highest quality full face diving masks on the market and is used by divers throughout the world.  For more information visit: Interspiro Divator Full Face Mask

SMP Underwater Cutting Rods

SMP Underwater Pro-Thermic Cutting Rods

SMP Underwater Pro-Thermic Cutting Rods

We cuurrently have around 175 boxes of underwater cutting rods in stock available for next day delivery subject to availability.  Our cutting rods offer exceptional performance and value for money when compared with other cutting rods on the market.  Our competitors offer cutting rods in quantities of 66 rods per box at a similar price to our rods which come in quantities of 100 rods per box.  Therefore our rods offer around 33% more rods which is a significant cost saving, especially when buying multiple quantities.

For information visit: SMP underwater cutting rods

In addition to cutting rods, we also sell cutting torches, namely the Broco BR-22 Cutting Torch.

Broco BR-22 Cutting Torch

Broco BR-22 Cutting Torch

For more information please visit: Broco BR-22 Cutting Torch