Underwater Lift Bags and Inflatables – SUBSALVE USA

SMP
SMP are agents for SUBSALVE USA and we stock a wide range of their products. They are the worldwide leaders and innovator in the design and manufacture of bouyancy engineered inflatables. Their products are specified to meet the toughest challenges in recreational, commercial, scientific, and military applications.

Call +44(0)1772 687775 or email sales@smp-ltd.co.uk for a quote on any Underwater Lifting Bags and Equipment

Featured Products
SMPProfessional Enclosed Lift Bags

Enclosed-bottom, parachute-shaped lift bags with a single attachment point.

These Subsalve lifting bags are essential in construction, heavy and light salvage and many offshore tasks.

SMPInflat-A-Tank

Rugged, flexible storage containers for water, fuel, sanitary discharge, and other liquids. Every tank is manufactured of heavy duty urethane coated nylon fabric. Tanks are affordable, easy to install, and require minimal maintenance.

SMPVertical Salvage Pontoons

Totally-enclosed, cylindrical bags are ideal for shallow water salvage, reducing the draft of a vessel or raising an object closer to the surface.

They are invaluable in cable and pipeline operations.

SMP

• Each lift bag is tested prior to shipping.
• Custom sizes available on most products
• All products are compliant with IMCA D-016-AIRBAGS, ABS, U.S. Department of Defense Standards.

Please contact us +44(0)1772 687775 / sales@smp-ltd.co.uk with all enquiries and quote requests for Underwater Lifting Bags and one of our Customer Services Team will get back to you.

———————————————————————-
About Submarine Manufacturing and Products Limited

SMP are firmly established as one of the world’s leading manufacturers and suppliers of commercial diving equipment. We manufacture Hyperbaric Decompression Chambers, Saturation Diving Systems, Hot Water Machines, Diver Gas Supply Panels, Containerised Diving Solutions and Diver Launch and Recovery Systems (LARS). The SMP projects team also design and manufacture bespoke diving solutions.

For information on these and all other products we manufacture, please take a look at our website.
www.smp-ltd.com

NEW PRODUCTS: Wet Bell Launch And Recovery Systems (LARS)

Status

NEW PRODUCTS!!
WET BELL LAUNCH AND RECOVERY SYSTEMS (LARS)

We are pleased to announce the introduction to the market of two new products.

1. Wet Bell Launch And Recovery System With Control Cabin & Mixed Gas Panel
2. Wet Bell Launch And Recovery System

Our Launch And Recovery System (LARS) products have been designed and developed in-house and will be manufactured at our factory in the UK. As with all SMP products, we only use premium materials and highly skilled personnel to enable us to build the best quality final product for our customers.

The SMP Wet Bell LARS is designed within a compact operating footprint to minimise the required operational deck space on board a vessel or barge. Emphasis has been placed on ease of mobilisation and demobilisation, so that costs are kept to a minimum.

The Wet Bell LARS is IMCA D023 and D018 compliant and has Third Party Design approval to Lloyds Rules for Lifting Appliances in a Marine Environment.

When fully retracted by the hydraulic cylinders, with the wet bell and clump weight stowed on the heavy duty based skid, the size and dimensions of the Wet Bell System is comparable in width to an ISO 20’ container, but is approximately 2.0 meters shorter. The heavy duty based skid has ISO corner castings situated on each corner so that the system can be located on conventional twist locks with 6 additional welded deck fastening points for the attachment of bolted sacrificial deck fixing plates, which are provided with each system.

The Wet Bell has a transparent top acrylic dome for 360 degree visibility during diver transit to depth. The Wet Bell can be supplied as a 2 or 3 diver unit to suit the customer’s operational requirements.

The Wet Bell System is outfitted with two manriding hydraulic winches for deployment and recovery of the Wet Bell and Clump Weight during normal operation. The clump weight winch can recover the Wet Bell in an emergency situation.

The two 30kW independent hydraulic power units (HPU) are sized to ensure the units are never running at full load conditions, thus extending the life of the HPU. The units are outfitted with premium sized oil reservoirs for safe operation in higher ambient temperatures, with seawater oil coolers fitted as standard. The hydraulic interconnecting piping and fittings from the HPU to the winches and hydraulic cylinders are all 316 Stainless Steel.

The hydraulic cylinders are of heavy duty construction with Stainless Steel cylinder rods fully chrome plated. The cylinders are fitted with counterbalance valves for safety during operation in the event of pressure loss at the cylinder or piping.

With every unit sold you can be sure of SMP’s full technical support, from our team of highly experienced designers, engineers and technicians.

Wet Bell LARS – Technical Specifications
Depth Capability 100 metre
Operational Depth
Design Appraisal Lloyds Register of Shipping
Design Approval Lloyds Rules for Lifting Appliances in a Marine Environment
IMCA Compliance IMCA D023 & IMCA D018 (and D037 optional)
Wet Bell Cylinders 4 x 50 Litre Cylinders 300 Bar rated
Wet Bell Dimensions 1.350 mm x 1,890 mm
Length 4258 mm
Width 2438 mm
Height (Operational) 4181 mm
Height (Stowed) 2600 mm
Weight 7000 kg
Hydraulic Power Units 2 x 30kW HPU Tank Mounted Submerged Vane Pump
HPU Electrical 3 Phase 380 – 440 Volts 50 / 60 Hz
HPU Oil Capacity 2 x 200 Litre Hydraulic Tanks with Inspection Covers
HPU Working Pressure 100 bar @ 90 Litres / Min @ 1450 RPM
Seawater Oil Cooler Shell and Tube Type Seawater 45 Litre / min @ 5 bar Max
Wet Bell Winch Manriding 16 mm Dia x 120 Meters Anti Rotational Wire Rope
Clump Winch Manriding 13 mm Dia x 240 Meters Anti Rotational Wire Rope
Specifications with Control Cabin & Mixed Gas Panel
Dive Control Cabin 2438 mm x 2058 mm x 2591 mm
Air Conditioning For heating and cooling the Dive Control Cabin
Mixed Gas Control Panel For Diver 1, Diver 2 and Wet Bell supplies
Hydraulic Power Units 2 x 30kW HPU Tank Mounted Electric Motor & Submerged Hydraulic Vane Pump Set
Download full specifications (PDF)

For all enquiries and questions please contact our UK based Sales Team
Tel: +44 (0) 1772 687775
sales@smp-ltd.co.uk

About Submarine Manufacturing and Products Limited
SMP are firmly established as one of the world’s leading manufacturers and suppliers of commercial diving equipment. We manufacture Hyperbaric Decompression Chambers, Saturation Diving Systems, Hot Water Machines, Diver Gas Supply Panels, Containerised Diving Solutions and Diver Launch and Recovery Systems (LARS). The SMP projects team also design and manufacture bespoke diving solutions.

For information on these and all other products we manufacture, please take a look at our website: -
www.smp-ltd.com

Commercial Diving Equipment – In Stock April 2015

Here is a small selection of the Commercial Diving Equipment that we currently have available. For our full range please take a look at our website www.smp-ltd.com

Please email sales@smp-ltd.co.uk or telephone +44 (0)1772 687775 for a quotation on all your commercial diving needs from branded products to bespoke manufactured items all at competitive prices.



60″ Standard SMP Hyperbaric Chamber
In Stock: 1



72 inch / 1.8 Mtr Twin Lock DDC C/W Medical Lock
In Stock: 1



SMP Prothermic Underwater Cutting Rods
In Stock: 103 Boxes


Barracuda Gold Underwater Wet Welding Electrodes
In Stock: 52

Fibrolite Diving Umbilical: 3 CoreIn Stock: 300m + Fibrolite Diving Umbilical: Pneumo Gas, Comms & Mini TVIn Stock: 350m +

Kirby Morgan 37 Commercial Diving Helmet 

In Stock: 5


Kirby Morgan SuperLite 27 Commercial Diving Helmet
In Stock: 1

Kirby Morgan 28 Band Mask

In Stock: 1

Tescom Regulator 3/4″ NPT F Brass 172 Bar Outlet
Model No: 44-1315-2122-056 
In Stock: 5


Tescom High Flow Pressure Reducing Regulator
Model No: 44-4012E28-002

In Stock: 2


RH2 Regulator 3/8″ Port Valved
Model No: NA20101/02

In Stock: 3


PressurVak II (no 1st stage regulator or mic)
In Stock: 6


Scott Duo Seal Mask
(no 1st stage or regulator)

In Stock: 4


Hyperflow CO2 Scrubber (24 Volt)
In Stock: 3

SMP Chamber Radio

In Stock: 10


2 Diver HP/LP Panel with Radio in Pelicase
In Stock: 1


OTS SSB-2010 Diver Transceiver
In Stock: 3


Hot Water Machine Pump
CRNE1-23-HS-P-GI-E-HQQE 3X400V 50/60Hzl
In Stock: 2


Depth Gauge 0-70 msw
In Stock: 21


Depth Gauge 0-100 msw
In Stock: 69


CO2000 Portable Gas Analyser Rechargeable
In Stock: 1

SMP has lots more Commercial Diving Equipment available in stock for immediate delivery

Whatever your requirements give us a call.

+44 (0)1772 687775
sales@smp-ltd.co.uk
www.smp-ltd.com

Transfer Under Pressure (TUP) Diving System

We are offering for sale a Transfer Under Pressure (TUP) Diving System.
The TUP Diving System is a Closed Bell Diving System, designed and manufactured by SMP Ltd.

It is certified in accordance with International Maritime Contractors Association (IMCA) guidelines and codes of practice for offshore diving operations and certified by Lloyds Register of Shipping.


This compact modular system consists of a 3 man 4.7m3 saturation diving bell, diver’s gas control panels (air/mixed gas), main Bell/Diver control panel, twin lock decompression chamber, single lock decompression chamber (optional), HP and LP compressors, gantry launch and recovery system.

The system is equipped for air diving and mixed gas diving and the clump weight also incorporates a tool basket for the divers. A hyperbaric floataway chamber is optional.

The Diving System is a mobile and modular system that can be mobilised on a DPII support vessel, platform, rig or construction barge. The system is designed for moonpool or over the side operations. Using Trimix or Nitrox gas mixtures will allow longer duration in-water bottom time at greater depths than using air diving techniques which cause longer in-water and decompression practices.

By providing a closed bell system the divers are transferred in a protected environment. Safety is increased by removing the threat of Nitrogen intoxication. This is achieved by making sure at no point is the diver exposed to atmospheric pressure during decompression.

The benefits are clear to see and it is the way forward in today’s demanding market for deep air diving operations and continual surface mixed gas operations.

Safe No surface decompression interval, protected transfer to and from the splashzone
Proven An enhanced proven solution that increases workable bottom time
Future Proof Upgradeable to Saturation Diving Capability (Future Proof Capability)
Cost Effective The system provides cost effectiveness through increased bottom times for the divers
Mobile This modular system can be easily transported and mobilised in 24 hours providing fast turnaround for offshore operations on any suitable vessel

There is also the capability for one dive team to be in decompression whilst a second dive team commence diving operations which means less down time on jobs.

Download our Full Product Brochure for all specifications and features

Contact us sales@smp-ltd.co.uk with any questions or if you are interested in a quotation.

Ask our Team
SMP design, manufacture and supply a wide range of commercial diving equipment, please email sales@smp-ltd.co.uk or telephone +44 (0)1772 687775 for a quotation on all your commercial diving needs from branded products to bespoke manufactured items all at competitive prices.

Commercial Diving Equipment In Stock February 2015

Here is a small selection of the Commercial Diving Equipment that we currently have available or in build for despatch. For our full range please take a look at our website www.smp-ltd.com

Please email sales@smp-ltd.co.uk or telephone +44 (0)1772 687775 for a quotation on all your commercial diving needs from branded products to bespoke manufactured items all at competitive prices.

SMP Dual Basket Launch and Recovery System
In Build: 1

60″ Standard SMP Hyperbaric Chamber
In Stock: 1

SMP Recovery Vest MK6 with Back Pack
In Stock: 10+

Coltri MCH16/DY TECH Air Compressor
In Stock: 1
CO2000 Portable Gas Analyser Rechargeable
In Stock: 1

SMP Prothermic Underwater Cutting Rods
In Stock: 130 Boxes


Kirby Morgan 37 Commercial Diving Helmet
In Stock: 6

Kirby Morgan SuperLite 27 Commercial Diving Helmet
In Stock: 2

Kirby Morgan 37 Stainless Steel Commercial Diving Helmet
In Stock: 2


Kirby Morgan 77 Commercial Diving Helmet
In Stock: 1

Kirby Morgan 18B Band Masks
In Stock: 2

2 Diver HP/LP Panel with Radio in Pelicase
In Stock: 1


Cygnus 1 Underwater MK4 Ultrasonic Thickness Gauge c/w Probe
In Stock: 1


Fibrolite Diving Umbilical: 3 Core
In Stock: 1000m +


Fibrolite Diving Umbilical: Pneumo Gas, Comms & Mini TV
In Stock: 1000m +


RH2 Regulator 3/8″ Port Valved
In Stock: 2

STX101 Aquacom SSB 4 Channel Surface Station
In Stock: 2

OTS SSB-2010 Diver Transceiver
In Stock: 2

PressurVak II (no 1st stage regulator or mic)
In Stock: 10


Tescom Regulator 3/4″ NPT F Brass 172 Bar Outlet
In Stock: 5

OTS Guardian Mask Package Inc Buddy Phone ABV-1 Hose and Bag
In Stock: 2

SMP 2 Diver Radio
In Stock: 7

SMP has lots more Commercial Diving Equipment available in stock for immediate delivery. Whatever your requirements give us a call.

+44 (0)1772 687775
sales@smp-ltd.co.uk
www.smp-ltd.com

Scuba Replacement Package (SRP)

Scuba Replacement Package (SRP)

The SMP 2 Diver Scuba Replacement Package houses the dive panel, cylinders and umbilicals in an easy to transport package. The mild steel frame is engineered with lifting points and engraved stainless steel panel fascia.

There are 4 x 50 Litre 300Bar cylinders mounted inside the protective crash frame creating 3 regulated air supplies. Above the cylinders are removable trident racks for umbilical storage.

Scuba Replacement Package

The integrated panel has been designed to comply with the requirements set by respected helmet manufacturers.

The scuba replacement package is designed in accordance with Inshore and Offshore requirements outlined in ADC, HSE, IMCA D040 & D015 and OGP guidelines. The system is supplied fully certified, calibrated and complete with supporting documentation to IMCA D018.

Dimensions: 650 mm wide x 2150 mm length x 1465 mm high
Weight: 550 kg
Connections:

  • Inlets: HP Charging – 4 JIC
  • Outlets: Divers Supply – 6 JIC
  • Divers Pneumo – 4 JIC

Optional Extras:

  • Diver Communications
  • Diver Umbilicals
  • Diver CCTV

www.smp-ltd.com/product/productid/186/productname/Scuba-Replacement-Package-(SRP)/

For full specifications or to discuss your requirements: -
Call +44(0)1772 687775 or email sales@smp-ltd.co.uk

Tunnel Boring Machine (TBM) Transfer Shuttles

SMP have recently been contracted to build TBM Personnel Transfer Shuttles for a major tunnelling project.

Transfer Shuttles are used for transferring compressed air workers/divers from the air locks of the TBM to the main decompression complex. The Shuttle is designed to accommodate 2 men in the entry lock and 6 men in the main lock.

The Life Support System is designed to provide two (2) hours of life support when it is disconnected from the TBM or decompression complex. The chamber is installed in a crash proof exostructure with interconnecting chamber mating clamp mounted on the end of the structure. These units are mounted on wheels so that they can be transported easily during a working transit period.

CHAMBER EQUIPMENT OVERVIEW

0-10 Bar/MSW Gauges & 0-2.4 Bar/MSW Therapeutic Gauge
0-400 Bar HP Gauges & 0-30 Bar LP Gauges
Communications Radio & Sound Powered Phone
Oxygen & Carbon Dioxide Analyzer with Flow Meter with High and Low Sample
Vessel Over Pressure Relief Valves
Suitable Service Control Valves
Tungum Pipe Work
Oxygen Overboard Dump Masks
BIBS – Oxygen & Mixed Gas Connections
CO2 Scrubbers
Temperature & Humidity Hygrometer
Habitat Conditioning Unit (Cooling)
Hyperbaric Mattresses
BIBS Exhaust Back Pressure Regulator Assemblies
Chamber Internal CCTV Monitoring
Hyperbaric LED Lights
Hyperbaric Fire Extinguishers
Water Mist Fire Suppression System

For full specifications or to discuss your requirements: -
Call +44(0)1772 687775 or email sales@smp-ltd.co.uk

SMP Diver Decompression Chambers

SMP design and manufacture a wide range of Diver Decompression Chambers (DDC’s) and Hyperbaric Chambers used for Hyperbaric Oxygen Therapy (HBOT).

These are commonly used by divers, medical practices and sporting institutions.

We have 1.8 metre Twinlock DDC’s available for delivery within the next few weeks.
These can be supplied as standalone DDC’s or containerised within 20ft ISO / DNV Containers that meet current IMCA regulations.

Please call +44(0)1772 687775 or email sales@smp-ltd.co.uk to discuss your requirements and specifications.

Diver Decompression Chambers
Diver Decompression Chambers
Diver Decompression Chambers

If you are interested in purchasing a Diver Decompression Chamber please contact us to discuss your requirements.

Tel: +44 (0)1772 687775
Email: sales@smp-ltd.co.uk

Twin Diver Launch and Recovery Systems

SMP Twin Basket Hydraulic Diver Launch & Recovery System

SMP Twin Basket Hydraulic Diver Launch & Recovery System
We currently have a Twin Basket Hydraulic Diver Launch & Recovery System in production at our UK factory. Available to order now. Estimated to be ready for delivery on Friday 27th February 2015.

If you want to make an enquiry
Call NOW: +44 (0) 1772 687775 or email sales@smp-ltd.co.uk

SMP’s Twin Basket Launch and Recovery System has been specifically designed to give a compact operating footprint to minimise the deck space required on board a vessel or barge. Emphasis has been placed on ease of mobilisation and demobilisation so that these costs are kept to a minimum.

The LARS folds down in order that it fits into a standard ISO 20’ shipping container, thus expensive shipping costs for out of gauge size goods are avoided. This also allows for safe storage and protection of the LARS from the elements during periods when the equipment is not required operationally.

The main components of the system are broken down as follows:-

  • Base Skid
  • A Frame
  • Two Clump Weights
  • Primary Dive Basket (Two Diver)
  • Secondary Dive Basket (Standby Diver)
  • Electric Hydraulic Powerpack with Triple Motors and Pumps
  • Winches

Depth Capability: 75 mtrs
Design: Lloyds Register Rules for Offshore lifting
Certification: IMCA DO23 Design & IMCA DO18
Primary Basket / Cage Cylinders: 2 x 50 Litre @ 300 Bar
Weight: 6500kg
HPU Electrical Requirements: 380-440 V 3PH 50/60 Hz
Oil Capacity: 3 x 150 Litre (Triple Tank)
Main Lift Wire: 13 mm dia Length 80 metres
Anti Rotational Clump Weight Wire: 13 mm dia Length 160 metres Anti Rotational

SMP Twin Basket Hydraulic Diver Launch & Recovery System

If you are interested in purchasing any of our Launch and Recovery Systems (LARS) please contact us to discuss your requirements.

Tel: +44 (0)1772 687775
Email: sales@smp-ltd.co.uk

SMP Diver Decompression Chambers (DDC)

We have 2 standalone Diver Decompression Chambers available for delivery from December 12th 2014. 

Please call +44(0)1772 687775 or email sales@smp-ltd.co.uk for full specifications, pricing, options and delivery information

SMP DDCSMP Twin Basket Hydraulic Diver Launch & Recovery SystemSMP DDCSMP DDC

If you are interested in purchasing a Diver Decompression Chamber please contact us to discuss your requirements.

Tel: +44 (0)1772 687775
Email: sales@smp-ltd.co.uk