NEW PRODUCTS: Wet Bell Launch And Recovery Systems (LARS)

NEW PRODUCTS!!
WET BELL LAUNCH AND RECOVERY SYSTEMS (LARS)

We are pleased to announce the introduction to the market of two new products.

1. Wet Bell Launch And Recovery System With Control Cabin & Mixed Gas Panel
2. Wet Bell Launch And Recovery System

Our Launch And Recovery System (LARS) products have been designed and developed in-house and will be manufactured at our factory in the UK. As with all SMP products, we only use premium materials and highly skilled personnel to enable us to build the best quality final product for our customers.

The SMP Wet Bell LARS is designed within a compact operating footprint to minimise the required operational deck space on board a vessel or barge. Emphasis has been placed on ease of mobilisation and demobilisation, so that costs are kept to a minimum.

The Wet Bell LARS is IMCA D023 and D018 compliant and has Third Party Design approval to Lloyds Rules for Lifting Appliances in a Marine Environment.

When fully retracted by the hydraulic cylinders, with the wet bell and clump weight stowed on the heavy duty based skid, the size and dimensions of the Wet Bell System is comparable in width to an ISO 20’ container, but is approximately 2.0 meters shorter. The heavy duty based skid has ISO corner castings situated on each corner so that the system can be located on conventional twist locks with 6 additional welded deck fastening points for the attachment of bolted sacrificial deck fixing plates, which are provided with each system.

The Wet Bell has a transparent top acrylic dome for 360 degree visibility during diver transit to depth. The Wet Bell can be supplied as a 2 or 3 diver unit to suit the customer’s operational requirements.

The Wet Bell System is outfitted with two manriding hydraulic winches for deployment and recovery of the Wet Bell and Clump Weight during normal operation. The clump weight winch can recover the Wet Bell in an emergency situation.

The two 30kW independent hydraulic power units (HPU) are sized to ensure the units are never running at full load conditions, thus extending the life of the HPU. The units are outfitted with premium sized oil reservoirs for safe operation in higher ambient temperatures, with seawater oil coolers fitted as standard. The hydraulic interconnecting piping and fittings from the HPU to the winches and hydraulic cylinders are all 316 Stainless Steel.

The hydraulic cylinders are of heavy duty construction with Stainless Steel cylinder rods fully chrome plated. The cylinders are fitted with counterbalance valves for safety during operation in the event of pressure loss at the cylinder or piping.

With every unit sold you can be sure of SMP’s full technical support, from our team of highly experienced designers, engineers and technicians.

Wet Bell LARS – Technical Specifications
Depth Capability 100 metre
Operational Depth
Design Appraisal Lloyds Register of Shipping
Design Approval Lloyds Rules for Lifting Appliances in a Marine Environment
IMCA Compliance IMCA D023 & IMCA D018 (and D037 optional)
Wet Bell Cylinders 4 x 50 Litre Cylinders 300 Bar rated
Wet Bell Dimensions 1.350 mm x 1,890 mm
Length 4258 mm
Width 2438 mm
Height (Operational) 4181 mm
Height (Stowed) 2600 mm
Weight 7000 kg
Hydraulic Power Units 2 x 30kW HPU Tank Mounted Submerged Vane Pump
HPU Electrical 3 Phase 380 – 440 Volts 50 / 60 Hz
HPU Oil Capacity 2 x 200 Litre Hydraulic Tanks with Inspection Covers
HPU Working Pressure 100 bar @ 90 Litres / Min @ 1450 RPM
Seawater Oil Cooler Shell and Tube Type Seawater 45 Litre / min @ 5 bar Max
Wet Bell Winch Manriding 16 mm Dia x 120 Meters Anti Rotational Wire Rope
Clump Winch Manriding 13 mm Dia x 240 Meters Anti Rotational Wire Rope
Specifications with Control Cabin & Mixed Gas Panel
Dive Control Cabin 2438 mm x 2058 mm x 2591 mm
Air Conditioning For heating and cooling the Dive Control Cabin
Mixed Gas Control Panel For Diver 1, Diver 2 and Wet Bell supplies
Hydraulic Power Units 2 x 30kW HPU Tank Mounted Electric Motor & Submerged Hydraulic Vane Pump Set
Download full specifications (PDF)

For all enquiries and questions please contact our UK based Sales Team
Tel: +44 (0) 1772 687775
sales@smp-ltd.co.uk

About Submarine Manufacturing and Products Limited
SMP are firmly established as one of the world’s leading manufacturers and suppliers of commercial diving equipment. We manufacture Hyperbaric Decompression Chambers, Saturation Diving Systems, Hot Water Machines, Diver Gas Supply Panels, Containerised Diving Solutions and Diver Launch and Recovery Systems (LARS). The SMP projects team also design and manufacture bespoke diving solutions.

For information on these and all other products we manufacture, please take a look at our website: -
www.smp-ltd.com

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>