SMP LTD  - Submarine Manufacturing and Products Limited
Like SMP on Facebook.com
SMP on Linkedin.com

SMP LTD - Commercial Diving Equipment & Hyperbaric Chambers

Stanley HP8 Hydraulic Power Unit

Browse Commercial Diving Equipment
SMP are Registered Members of IMCA Registered members of IMCA





We are BSI Registered

We are BSI Registered for ISO 9001 & ISO 14001

Stanley HP8 Hydraulic Power Unit

The HP8 power unit is designed for continuous duty operation of any hydraulic tool in the Type I or Type II category or wherever 8gpm at 2000 psi of hydraulic power is required. The HP8 provides world class cooling in a compact powerful unit.

Stanley HP8 Hydraulic Power Unit



Download Product Datasheet
Click here to download product datasheet


 
Stanley Logo
Stanley HP8 Hydraulic Power Unit
 
Ref: HP8BA
Add to item quote
For sales enquiries please 'Add to Quote'
or contact us / call our UK based sales team on +44 (0)1772 687775

Description
 

The new generation Stanley GT18 Power Unit is the latest in construction site hydraulic power for tools. The GT1 8 conforms to the Hydraulic Tools Manufacturers Association (HTMA) Type 1 and Type 2 tool circuit recommended performance. It will deliver 5 gpm or 8 gpm at pressures up to 2000 psi with heat rejection capacity exceeding the HTMA recommendation of 5 hp.

Computerized, electronic throttle control is standard on all models. The control allows for selection of constant engine speed or automatic speed. Automatic speed increases engine speed from idle when it senses tool working demand. When there is no tool working demand, engine speed is returned to idle. The automatic speed mode provides lower fuel use and less noise.

All electric control system with rotary switches. All components in the GT18 are assembled for easy routine servicing. The upper frame can be removed for more serious servicing. A quartz hour meter in the control panel records engine run time.
The hydraulic pump is mounted directly to the engine eliminating any misalignment and ensuring long life of the drive coupling. An in-tank hydraulic filter continuously cleans the hydraulic fluid and assures that refill fluid passes through the filter for a clean refill. A 35-Ah sealed, non-spillable, no-maintenance battery is located inside a covered compartment.

Moving the GT18 around is made easy with a lift-and-latch handle.
Both engine models (Briggs or Honda) have pressure lubrication systems with a pressure sensing switch that will shut down the engine if the engine oil level is too low.
Some GT18 models are available with 110 vac, 60 Hz electric power provided by a Briggs & Stratton PowerLink inverter system. This system will deliver 1000 watts, continuous and 1500 watts in termittent power through GFCI receptacles.


Features
 

• Type II or Type III hydraulic circuit with superior cooling.
• Tool circuit lockout during startup - safety feature.
• Lift & Latch handle with fold-up side handles.
• Quartz hour meter on control panel records engine run time.
• 35-AH sealed, non-spillable, no maintenance battery located in covered compartment.
• In tank hydraulic filter with dipstick and easy access filter replacement.

Specification
 

Output Capacity:  5 or 8 GPM20 or 30 LPM
Pressure: 2000 PSI / 140 BAR
Circuit Type: Open Centre
Hydraulic Reservoir Capacity: 3 Gallons / 11.4 Litres
Fuel Tank Capacity: 5.5 Gallons / 20.8 Litres
Weight: 330 LBS / 150 KG
Length: 35 IN / 89 CM
Width: 21.5 IN / 54.6 CM
Height: 29 IN / 74 CM
Engines: Briggs & Stratton, 18 HP Vanguard OHV
Connector: HTMA Flush Faced coupler



For instant service contact our sales team
Telephone +44 (0)1772 687775

Our top selling Commercial Diving Equipment

Kirby Morgan EXO-BR Full Face Mask

The Kirby Morgan EXO Full Face Mask was designed for both surface supplied and scuba diving.

Kirby Morgan 37 Commercial Divers Helmet

The Kirby Morgan 37 Commercial Divers Helmet is one of the most popular designs in the commercial diving world. It's considered the standard of the commercial diving industry.

Kirby Morgan 18B Band Masks

The fully tested and certified, the Kirby Morgan KMB 18B Band Masks may be used by commercial divers in mixed gas commercial diving as well as shallow water commercial diving.

Rhino 950 Workboat

The Rhino 950 is a large High Density Polyethylene (HDPE)  workboat that is ideally suited for use as a Dive SRP boat as well as a personnel transfer boat. It can be transported in a 12m flatā€rack.

Kirby Morgan SuperLite 27 Commercial Diving Helmet

The Kirby Morgan SuperLite® 27 Commercial Diving Helmet is the product of years of research and testing. The KM SuperLite® 27 design gives the commercial diver a reliable, and extremely comfortable commercial diving helmet.

AGA Interspiro Divator MK II Face Mask

The Interspiro line of diving full-face masks (FFMs) are high quality masks and have been field proven by Government, Military, and Commercial & Public Safety Teams around the world.