SMP LTD  - Submarine Manufacturing and Products Limited
Like SMP on Facebook.com
SMP on Linkedin.com

SMP LTD - Commercial Diving Equipment & Hyperbaric Chambers

Block and Tackle Recovery

Browse Commercial Diving Equipment
SMP are Registered Members of IMCA Registered members of IMCA





We are BSI Registered

We are BSI Registered for ISO 9001 & ISO 14001

Block and Tackle Recovery

IMCA required Block & tackle system for Wet Bell. Comes standard with 8meter. All metal is SS 316.

Block and Tackle Recovery



Download Product Datasheet
Click here to download product datasheet


 
Block and Tackle
 
Ref: JKLQ.S0030
Add to item quote
For sales enquiries please 'Add to Quote'
or contact us / call our UK based sales team on +44 (0)1772 687775

Description
 

IMCA required Block & tackle system for Wet Bell. Comes standard with 8meter. All metal is SS 316.

The Diver Recovery Block and Tackle is used in the recovery of a diver into the diving bell. It is a 3:1 advantage pulley system with an extended length of 6m* – this is the estimated length from the top of the inside of the bell, through the bell trunking, to the base of the stage. Please check that this is the length required for your system - tailored lengths are available upon request.

Safe working load (SWL) - 385 Kgs
Breaking Load - 770 Kgs 

Lifting point:
The block and tackle needs to be attached to a secure lifting point which should be certified for at least 900Kg – a fully dressed diver can be estimated at 140Kg and this offers a 6x safety factor.

Pulleys:
The top pulley is fitted with a cam cleat which enables the rope to be ‘locked off’ each time it is pulled for recovery, thus permitting single-handed operation. The angle of the cleat is adjustable via ratcheted locking pin system, and this should be adjusted prior to use to suit the angle of use by the operator in the bell to make sure that it is in the optimum position. The bottom pulley has a quick opening snap shackle to permit clipping on to the lifting/recovery point on the diver’s harness.

Storage:
The Block & Tackle should be coiled neatly and stored in a safe, dry place when not in use, ensuring that the rope and pulley blocks are clean of dirt as much as possible. 



For instant service contact our sales team
Telephone +44 (0)1772 687775

Our top selling Commercial Diving Equipment

ZODIAC MARK V HEAVY DUTY

This is a unique range of larger inflatables that is designed primarily to carry heavy loads at planing speeds due to its patented Futura hull shape.

Subsalve USA Commercial Lift Bag

Subsalve Commercial Lift Bags are especially suited for remote locations or for deployment from small craft and are capable of being used by a single diver. All Subsalve Lift bags meet IMCA (International Marine Contractor’s Association) standard

SMP Prothermic Underwater Cutting Rods

SMP Prothermic Underwater Cutting Rods (Boxes of 100) can be used 1000ft below the surface or by fabrication and welding companies on dry land.

50 Litre Air Storage Cylinder with 300 bar Bullnose Valve

50 litre steel gas storage cylinder which comes complete with 300 bar bullnose valve

Kirby Morgan 18B Band Masks

The fully tested and certified, the Kirby Morgan KMB 18B Band Masks may be used by commercial divers in mixed gas commercial diving as well as shallow water commercial diving.

OTS Guardian Full Face Mask

The OTS Guardian line of Full-Face Masks (FFMs) is the most recent diving innovation from OTS. Designed to meet the demanding needs of todays Commercial/Professional Diver, it leverages the best features found on other FFMs with unique feature