SMP LTD  - Submarine Manufacturing and Products Limited
Like SMP on Facebook.com
SMP on Linkedin.com

SMP LTD - Commercial Diving Equipment & Hyperbaric Chambers

Enclosed Shallow Water Flotation Bags

Browse Commercial Diving Equipment
SMP are Registered Members of IMCA Registered members of IMCA





We are BSI Registered

We are BSI Registered for ISO 9001 & ISO 14001

Enclosed Shallow Water Flotation Bags

When you need to float an object in extremely shallow water use SUBSALVE’s shallow water “pillow” shaped Enclosed Flotation Bags (also referred to as boulder bags).

Enclosed Shallow Water Flotation Bags



 
Enclosed Shallow Water Flotation Bags
Enclosed Shallow Water Flotation Bags
Enclosed Shallow Water Flotation Bags
Enclosed Shallow Water Flotation Bags
Product Options
Add item to quote
For sales enquiries please 'Add to Quote'
or contact us / call our UK based sales team on +44 (0)1772 687775

Description
 

When you need to float an object in extremely shallow water use SUBSALVE’s shallow water “pillow” shaped Enclosed Flotation Bags (also referred to as boulder bags). Utilize them in any position – upright or flat, outside or inside of structures—for vessel salvage, auto recovery, pipeline and cable installation and emergency flotation for ships, aircraft, submersibles and ROVs.


Features
 

Adaptive

· Configure with a multitude of rigging combinations.
· Use with a single or multiple attachment points around the perimeter of the bag.

Fabric

· Urethane-coated nylon—high-strength and heavy-duty
· Superior abrasion resistance
· Resistant to most petro-chemicals
· UV-resistant
· Low maintenance requirements and easy to clean
· RF welded seams

Lifting Harness

· Heavy nylon lift harness built into the body of the lift bag
· Safe working ratio of 6:1

Safe and easy to use

· Equipped with all necessary hardware—ready for immediate use
· 3/4″ NPT inflation/deflation port equipped with ball valve
· Stainless steel quick disconnect for inflation
· Pressure relief valves: set to release at 2.5 psi above ambient pressure
· Enough pressure relief valves are installed in each bag to allow expanding to vent should a free ascent occur.

• Each SUBSALVE USA lift bag is tested prior to shipping.
• Custom sizes available.
• All Subsalve USA products are compliant with IMCA D-016-AIRBAGS, ABS, U.S. Department of Defense Standards.


For instant service contact our sales team
Telephone +44 (0)1772 687775

Our top selling Commercial Diving Equipment

SMP Prothermic Underwater Cutting Rods

SMP Prothermic Underwater Cutting Rods (Boxes of 100) can be used 1000ft below the surface or by fabrication and welding companies on dry land.

Kirby Morgan 18B Band Masks

The fully tested and certified, the Kirby Morgan KMB 18B Band Masks may be used by commercial divers in mixed gas commercial diving as well as shallow water commercial diving.

50 Litre Air Storage Cylinder with 300 bar Bullnose Valve

50 litre steel gas storage cylinder which comes complete with 300 bar bullnose valve

Kirby Morgan 37 Commercial Divers Helmet

The Kirby Morgan 37 Commercial Divers Helmet is one of the most popular designs in the commercial diving world. It's considered the standard of the commercial diving industry.

Kirby Morgan EXO-BR Full Face Mask

The Kirby Morgan EXO Full Face Mask was designed for both surface supplied and scuba diving.

Subsalve USA Commercial Lift Bag

Subsalve Commercial Lift Bags are especially suited for remote locations or for deployment from small craft and are capable of being used by a single diver. All Subsalve Lift bags meet IMCA (International Marine Contractor’s Association) standard