SMP LTD  - Submarine Manufacturing and Products Limited
Like SMP on Facebook.com
SMP on Linkedin.com

SMP LTD - Commercial Diving Equipment & Hyperbaric Chambers

ME16R Microphone element (hot mic) 150 ohm

Browse Commercial Diving Equipment
SMP are Registered Members of IMCA Registered members of IMCA





We are BSI Registered

We are BSI Registered for ISO 9001 & ISO 14001

ME16R Microphone element (hot mic) 150 ohm

A true noise canceling microphone with outstanding sound quality that can withstand the harsh marine environment. A special membrane is used on both sides of the diaphragm which allows air, but not water, to enter.

ME16R Microphone element (hot mic) 150 ohm



Download Product Datasheet
Click here to download product datasheet


 
ME16R Microphone element
 
Ref: EXAA.S0044
Add to item quote
For sales enquiries please 'Add to Quote'
or contact us / call our UK based sales team on +44 (0)1772 687775

Description
 

A true noise canceling microphone with outstanding sound quality that can withstand the harsh marine environment. A special membrane is used on both sides of the diaphragm which allows air, but not water, to enter. This allows the microphone to cancel noise that is more then 1/4 in. away. Racket such as air, bubbles and breathing noise are virtually eliminated. This is especially noticed when using a full face mask with an oral-nasal cavity.

Designed to be robust, the membrane is designed to allow a user to take the mask off at the back of the boat while in the water.  In the past, microphones being exposed to sea water or to water while cleaning had a short life, not so with the Hot Mic. The Hot Mic element can withstand a differential pressure of about 12 feet. In OTS's tests, several dives were made to 35 feet and the AGA full face mask with a Hot Mic was removed.  After putting the mask back on and clearing it, communications were fine.

The Hot Mic will give you the finest intelligibility available and last for months with little maintenance.


Specification
 

The ME16R Microphone element has the following specifications:

  • Membrane is designed to allow a user to take the mask off at the back of the boat while in the water
  • Can withstand a differential pressure of about 12 feet, which means if a diver takes off the ffm at the back of the boat and drops down to 15 feet, the membrane will not be able to keep the water out and the microphone element will be damaged.
  • If you expose the Hot Mic® at any depth down to 130 feet and come up, no damage will occur.


For instant service contact our sales team
Telephone +44 (0)1772 687775

Our top selling Commercial Diving Equipment

SMP Twin Basket Diver Launch And Recovery System (LARS)

SMP’s Dual Basket Launch And Recovery System has been specifically designed to give a compact operating footprint to minimise the deck space required on board a vessel or barge.

SMP Recovery Vest MK6

The SMP R-Vest harness is manufactured from ultra-durable materials which give maximum comfort and long product life.

Rhino 950 Workboat

The Rhino 950 is a large High Density Polyethylene (HDPE)  workboat that is ideally suited for use as a Dive SRP boat as well as a personnel transfer boat. It can be transported in a 12m flatā€rack.

Kirby Morgan 37 Commercial Divers Helmet

The Kirby Morgan 37 Commercial Divers Helmet is one of the most popular designs in the commercial diving world. It's considered the standard of the commercial diving industry.

50 Litre Air Storage Cylinder with 300 bar Bullnose Valve

50 litre steel gas storage cylinder which comes complete with 300 bar bullnose valve

Kirby Morgan 18B Band Masks

The fully tested and certified, the Kirby Morgan KMB 18B Band Masks may be used by commercial divers in mixed gas commercial diving as well as shallow water commercial diving.