The fully tested Kirby Morgan SuperLite® 17B Commercial Diver’s Helmet set the working standard for the commercial diving industry worldwide.
Product Details (PDF Version)
For sales enquiries please 'Add to Quote'
or contact us / call our UK based sales team on +44 (0)1772 687775
The fully tested Superlite® 17B Commercial Diver's Helmet set the working standard for the commercial diving industry worldwide! Many thousands of underwater hours have proved that the SuperLite® 17B Kirby Morgan Commercial Diver's Helmet design to be dependable, comfortable, extremely rugged, and is Commercial Rated™. The Kirby Morgan SuperLite®17B Commercial Diver's Helmet has been tested and certified to meet or exceed all requirements for all governing agencies. The Kirby Morgan SuperLite®17B Commercial Diver's Helmet is also certified for use in commercial diving operations worldwide.
The Kirby Morgan SuperLite®17B Commercial Diver's Helmet has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89/686/EEC and as far as applicable, the EN250 (edition Jan 2000) and the E DIN 58 642 (edition Feb 1998). When the Kirby Morgan SuperLite®17B Commercial Diver's Helmet is used for air diving in countries that conform to C.E. regulations it may be used to a maximum depth of 164fsw (50 msw). I.A.W. EN250.
The Kirby Morgan SuperLite®17B Commercial Diver's Helmet system consists of two pieces: the neck dam-yoke and the commercial diving helmet. The commercial diver slips on the angled neck dam with the attached yoke. The neck clamp is then slipped onto the commercial diving helmet and locked. The locking system not only seals the neck dam to the commercial diving helmet but also secures the front of the yoke.
The Kirby Morgan SuperLite®17B Commercial Diver's Helmet also includes the Kirby Morgan Quad-Valve Exhaust System which retrofits to many of the Kirby Morgan Commercial Diving Helmets. The Kirby Morgan Quad Valve System is also recommended for commercial diving in biologically contaminated water, when the commercial diver is properly trained and qualified, using recommended procedures. The Kirby Morgan Quad-Valve Exhaust System has exceptionally low exhalation resistance that the commercial diver must experience to appreciate. The Kirby Morgan SuperLite®17A/B Commercial Diver's Helmet Retainer™ (chin strap) along with the new the Kirby Morgan SuperLite®17A/B Commercial Diver's Helmet Yoke Retainer™ (yoke strap) make it virtually impossible to have the commercial diving hat come loose. These upgrades are standard on all new the Kirby Morgan SuperLite®17B Commercial Diver's Helmet and will retrofit to all previous Kirby Morgan SuperLite®17B Commercial Diver Helmets.
The Kirby Morgan Side Block Assembly is standard in the B configuration: receiving the umbilical over the shoulder. The Kirby Morgan SuperLite® 17B Dive Helmet offers comprehensive head protection, an adjustable demand breathing system for gas economy, antiflooding features, rapid emplacement, a neck dam clamp that mechanically breaks a low-pressure lock, and a trim to fit angled neck dam which seats the dive helmet comfortably, especially when working in the face down position. The pull pin neck clamp release provides a system for prevention of accidental helmet removal.
Commercial divers can download the manual for the Kirby Morgan SuperLite®17B Commercial Diver's Helmet by going to our PARTS section. This will take the commercial diver to the Kirby Morgan webpage where the manual can be downloaded chapter by chapter free of charge.
Warning: Before attempting any diving in any type of contaminated water, a complete commercial diving and topside course in hazardous materials emergencies should be completed. The commercial divers and the topside team must be properly trained and have the proper safety equipment. All commercial diving helmets and suits can leak water under certain conditions. Divers should use extreme caution when diving in contaminated waters.
The Kirby Morgan SuperLite®17B Commercial Diver's Helmet Shell is made of hand laid up glass fiber reinforced thermal setting polyester (fiberglass) with carbon fiber reinforcement at key points for added durability. The Kirby Morgan SuperLite®17B Commercial Diver's Helmet is light and highly impact resistant, and provides a heat/cold barrier as well as being an excellent electrical nonconductor. Kirby Morgan has over 50 years experience in composite laminations.
The SuperLite 17B helmet has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89/686/EEC and, as far as applicable, the EN 250:2000, EN 250/A1:2006 and EN 15333-1:2008 (class B). It is fully CE marked with demand regulator SuperFlow® 350 and oral nasals P/N 510-690 and P/N 510-747.
“The Kirby Morgan Hot Water Shroud (Part #525-100) in conjunction with hot water to the commercial diver should be used whenever commercial diving operations are conducted using HEO2 at water temperatures less than 60°F (15.56°C) for the comfort of the commercial diver. Kirby Morgan DSI further recommends that the shroud be used in conjunction with hot water to the commercial diver whenever commercial diving operations are conducted using air or mixed gas, in waters colder than 36°F (2.22°C) to reduce the possibility of demand regulator icing.
Usually the greatest danger of demand regulator icing will be encountered on deck when the surrounding air temperature is less than 32°F (0°C). This effect is primarily due to the refrigeration effect of breathing air pressure reduction, and the addition of moisture from the commercial divers exhalation coming in contact with the topside air temperature.
If diving where the water temperature is 36°F (2.22°C) or warmer but the topside air temperature is below freezing, (32°F (0°C) icing of the demand regulator is possible. To help eliminate the possibility of freezing on the surface, warm water should be run over the exterior of the demand regulator prior to water entry, if the hot water system is not used.
Only commercial diving equipment certified and tested according to EN 250/E DIN 58 642 may be used with the Kirby Morgan SuperLite®17B Commercial Diver's Helmet when conducting commercial diving operations in European EC compliant countries.
The umbilical assembly should be composed of good quality diving hose that meets commercial diving industry standards. Generally, gas hose will be married to the communications wire, pneumofathometer hose, and strength member in a manner that will allow the strength member to receive all the strain. There are also good quality umbilicals available that are assembled at the factory using a twisted method which does not require marrying. Regardless of the system used, the umbilical is the commercial diver’s life line and should always be of excellent quality and maintained carefully.
|Kirby Morgan Helmet Retaining Systems Bulletin|
|Kirby Morgan New Oral Nasal w-Lens Repair Kit and Lens Repair Kit Bulletin|
|Kirby Morgan Superlite 17B Dive Helmet Blowaparts and Parts List|
|KM17B Demand Reg Breakout|
|KM17B Helmet Only Breakout|
|KM17B Neck Clamp Yoke Assembly Breakout|
|KM17B Side Block Assembly Breakout|
|New Oral Nasal Kirby Morgan part number replaces 510-690|
|For instant service contact our sales team
Telephone +44 (0)1772 687775
The Rhino 950 is a large High Density Polyethylene (HDPE) workboat that is ideally suited for use as a Dive SRP boat as well as a personnel transfer boat. It can be transported in a 12m flat‐rack.
The Interspiro line of diving full-face masks (FFMs) are high quality masks and have been field proven by Government, Military, and Commercial & Public Safety Teams around the world.
The fully tested and certified, the Kirby Morgan KMB 18B Band Masks may be used by commercial divers in mixed gas commercial diving as well as shallow water commercial diving.
A Two Diver Video & Communications System that is Portable, Waterproof, Rugged & Weighs only 12.7Kg
The OTS Guardian line of Full-Face Masks (FFMs) is the most recent diving innovation from OTS. Designed to meet the demanding needs of todays Commercial/Professional Diver, it leverages the best features found on other FFMs with unique feature
SMP’s Dual Basket Launch And Recovery System has been specifically designed to give a compact operating footprint to minimise the deck space required on board a vessel or barge.