SCUMPI System - Self Contained Underwater MPI

SKU: 1910

SCUMPI System - Self Contained Underwater MPI

SKU: 1910
Developed by RSL the SCUMPI System is a completely Self Contained Underwater MPI System. Safety features such as the 12 volt Lamp and Electromagnet are carried over from the RSL Umbilical System.

Be the first to review this product

Developed by RSL the SCUMPI System is a completely Self Contained Underwater MPI System. Safety features such as the 12 volt Lamp and Electromagnet are carried over from the RSL Umbilical System. The ink bag features an enclosed pump for operation and ink agitation yet can be changed out on site in a couple of minutes. The system has been specifically developed for work on RIB&rsquos or where electrical isolation poses a problem. With a continuous operating time of 5-6 hours and an ink capacity of 9 litres the SCUMPI System will be capable of performing extended MPI Inspection compared to other non-umbilical methods.

LAUNCH FRAME

Made of lightweight tubular construction the frame serves two functions. Firstly keeping the whole system together asa compact module and secondly providing protection for the subsea power pod ink bag and light during deployment orcross hauling through a structure. The lifting point is Dye Penetrant inspected and the shackle and lifting strop are bothissued with certificates.

Length 650mm x Width 360mm x Height 260mm

SUBSEA UNIT

Housing: Anodized Aluminium

Dimensions: 300mm diameter x 260mm overall height

Weight in air: 15KgWeight in water: 3Kg

Operating Time: 5-6 Hours Continuous

Charging Time: 10 Hours

INK BAGPUMP

All in one system with the pump located in the sealed Ink Bag. The complete assembly can be changed out in a few minutes. Ink agitation via internal pump

Size: Height 260mm x Diameter 300mm

Capacity: 9 Litres

Weight Full in air: 9KG

UV LAMPINK DISPENSER

Type: LED UV output

Warm up Time: Not required

Working Voltage: 12 Volts

Light Output: Conforms to BS EN ISO 3059

Weight in air: 1.8 KG

Dimensions: Length 280mm x 110mm OD

ELECTROMAGNET

Dimensions: 200mm x 155mm x 50mm

Weight in air: 2.2KG

Pole Dimensions: 20mm x 20mm

Operation: On/Off Switch

Both the UV Lamp and Electromagnet are 12Volt working for enhanced diver safety