Stanley DS11 Hydraulic Underwater Diamond Chainsaw

SKU: 131

More Views

Stanley DS11 Hydraulic Underwater Diamond Chainsaw

SKU: 131
The Stanley Hydraulic Underwater Diamond Chain Saw uses segments impregnated with diamond and laser welded to the saw & chain.

Be the first to review this product

The Stanley Diamond Chain Saw brings new technology to the concrete cutting industry. Using segments impregnated with diamond and laser welded to the saw’s chain, you can cut concrete (including wire or rebar reinforced), brick, concrete block, masonry or stone. Whether you are in construction, remodeling, demolition, maintenance or rescue, Stanley has a saw and chain combination to complete your job efficiently and productively. 

Square corner cut capability is inherent because the DS11 is a chain saw. It cuts square corners without over-cuts and the labor and expense of corner drilling and patching. That’s especially important in load-bearing walls where architects and engineers have specified no over-cut.

Plunge cut capability of the DS11 allows quick cutting of window, door, conduit and duct openings in walls and notching and trimming of concrete pipe. Ergonomic handles and guards help to reduce operator fatigue and provide protection from contact with the chain or materials being cut.

Heavy-duty cast aluminum chain guard prevents a loose or broken chain from being thrown from the saw. Compatible with HTMA Class II hydraulic systems, the DS11 can be powered from a Stanley compact power unit or any properly equipped hydraulic source.

Cut Various Materials: Stanley DS11 Chainsaw for underwater concrete cutting can cut concrete (including wire or rebar reinforced), brick, concrete block, masonry or stone.

Square Corners: Square corners can be achieved without over-cuts removing the expense of corner drilling and patching. Especially important where drawings and engineers have specified no over-cut so stength is maintained.

Plunge Cut: With the ability to plunge cut using the Stanley Underwater Diamond Chainsaw DS11 it is possible to notch and trim underwater concrete pipes and any other concrete, brick or stone accurately.

Heavy Duty: This Stanley DS11 is Quiet and smooth, powerful and rugged. Stanley hydraulic concrete chain saws are built for the professional concrete cutter.

Bars and Chains: With features that include a built-in Wallwalker for easier cutting, trigger activated valve for on-demand water, and a bespoke Stanley Hyrevz motor. The DS11 can be fitted with either 15 or 18" bars and chains and is suitable for cutting out apertures, sections or for demolition work.

Speedhook: The Stanley DS11 can be used in conjunction with a rail system called Speedhook, this would make the tool much easier to use in low visibility or heavy currents.

Capacity - 15 or 18 in. bar (38 or 45 cm bar) 

Performance - Underwater Concrete and Masonry 

Cutting Flow Range (Underwater Model) - 12 gpm (45 lpm) 

Pressure - 2000 psi (140 bar) 

Ports - 8 SAE O-Ring

Lubrication Cooling - Internal Water Channels in bar

Connection - 38 in. Male Pipe Hose End 

Weight - (With 18 in. bar Chain and Couplers) 26 lbs (11.8 kg) 

Length - (With Bar And Chain) 35 or 38 in. (89 or 97 cm) 

Width - 9 in. (23 cm)