This Underwater Impact Drill, Stanley ID07 is two hydraulic underwater tools in one, a high torque tool suitable for either nut running or wood auger drilling. Due to the high power of the tool it has impressive performance even drilling the hardest of materials such as greenheart.

Because the ID07 Drill has impact action, when drilling hard materials the torque is not transmitted to the user. The drill has both forward and reverse rotation and can be supplied with either a 7/16" quick change chuck or 1/2" square drive.

The ID07 delivers torque up to 500 ft lbs and can tighten and loosen nuts and bolts and drive lag screws underwater. Use the ID07 with the 05079 adapter and wood boring bits for drilling in timbers up to 11⁄16-inch diameter holes with no reactive torque to the diver.

High Torque: Integral Stanley Hyrevz gear motor produces high torque

Quality Build: Stainless Steel spools and fasteners

Speed: Forward-Reverse with variable speed

Maximum Impact Torque: 500 ft lbs/675 Nm of impact torque

Comfort: Oversized trigger with guard for operator comfort

Wiper: Wiper seals on reversing and trigger spool

Long Life: Built in reverse check valve ensures long seal life

Plastisol: Plastisol handle for comfortable ergonomic grip

Balance: Forward position of handle provides better balance

Open/Closed Feature: Open Center/Closed Center-Dual Spool Feature

Cast-in lifting eye

Output Capacity - 716 in. Quick Change or 12 in. 

Square Drive Torque - 500 ft. lbs (675 Nm) 

Input Flow Range - 4-12 gpm (15-45 lpm) at the commercial diver 

Input Pressure - 750-2000 psi (50-140 bar) 

Motor - Hyrevz motor 

Porting - -8 SAE O-ring

Weight - 7.2 lbs (3.3 kg) 

Length - 8.5 in. (21.6 cm) 

Width - 4.5 in. (11.4 cm) 

Height - 10 in. (25.4 cm)