It features an all stainless steel shell, as well as a stainless sideblock, helmet ring, handle, and other key components. The SuperFlow® 350 is standard on this helmet.

The advantages of this stainless steel helmet include the following:

-Rugged helmet shell and other components
-No refinishing required if the surface is scratched or gouged
-Elimination of threaded inserts for securing port retainer to helmet shell

Please note:

These are not for resale. Customer agrees and represents that it is buying for its own internal use only, and not for resale or distribution to any other third party.

SuperFlow® 350 Regulator: This all metal, fully adjustable, Commercial Rated™ demand regulator provides easy breathing and excellent performance with low pressure compressors.

Air Train: The air train diffuses incoming breathing air/gas onto the face port/lens to defog and ventilate

Auxiliary Port: The auxiliary port will allow for future add-ons and modifications to the stainless steel helmets. It is located on the port side of the shell as shown below.

Defogging Steady Flow Valve: Provides an additional flow of gas into the helmet for ventilation and defogging.

Emergency (EGS) Valve: Emergency (EGS) Valve supplies backup breathing gas to the diver. This valve is an integral, built in part of the stainless steel sideblock.

Gas Supply Non-Return Valve: Commercial Rated™, It prevents loss of gas pressure in the event of umbilical damage.

Handle: Removable Grip and handle. Handle can be removed without breaking seals, making it quick and easy to attach accessories.

Nose Block: Nose Block Device allows the diver to block the nose to equalize ears.

Rapid Change Modular Communications Systems: Because the module is easily removed the helmet, repair or replacement of communications parts is quick and trouble free. It is available with either a male waterproof connector or a bare wire post connection.

Silicone Oral Nasal Mask: Made of a superior silicone material which is hypo-allergenic and has a longer work life than latex.

Stainless Steel Shell: After x-ray inspection, each 316 stainless steel shell, is precision CNC machined to tight tolerances, to ensure proper fit to all other mating parts. The shell is durable and easy to maintain. Easily cleaned using a Scotch Brite® or similar type cleaning pad.

Stainless Steel Side Block: Multi use side block has additional ports built in to provide controlled air flow, if needed. The stainless steel sideblock has a built in EGS.

Whisker Wings: Bubble deflecting Whisker wings keep bubbles further from face port and ears, improving visibility and decreasing internal noise.

 

The Kirby Morgan Commercial Diving Helmet 37SS has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89686EEC and as far as applicable the EN 250:2000 EN 250A1:2006 and EN 15333-1:2008 (class B). It is fully CE marked with demand regulator SuperFlow 350 and oral nasals PN 510-690 and PN 510-747.

Weight: 30.96 lbs.
Helmet Shell: Stainless Steel
Control Knobs: Polyurethane
Lens: Scratch Resistant Polycarbonate
Neck Dam: Neoprene. Optional latex neck dam available.
O-Rings: Buna-N
Head Cushion: Nylon bag filled with ,4 Polyester foam
Cage Code: The cage code for identifying KMDSI products for U.S. government purposes is 58366.

Recommended Lubricants: All commercial diving helmets and band masks are lubricated at the factory with Christo-Lube. Kirby Morgan recommends Christo-Lube or Tribolube for all gas train components. Dow Corning 111 Silicone or equivelent may be used for helmet and mask components that are used with gas mixtures containing less than 50% oxygen.

Regulator Performance Kirby Morgan SuperFlow 350 Performance: The Kirby Morgan SuperFlow 350 regulator on the Kirby Morgan Commercial Diving Helmet 37SS offers high performance. The Kirby Morgan SuperFlow 350 regulator has been tested at Dive Lab at Panama City Florida. It meets all current U.S. Navy and European commercial diving standards. CR Standards: Kirby Morgan Commercial Diving Helmet 37SS meets or exceeds all standards established by Dive Lab of Panama City Florida and are CR (Commercially Rated) marked.

CE Approved: The Kirby Morgan Commercial Diving Helmet 37SS is CE Approved. The Kirby Morgan Commercial Diving Helmet 37SS has been tested and conforms to the performance requirements as set forth in Annex II of Directive 89686EEC and as far as applicable the EN 250:2000 EN 250A1:2006 and EN 15333-1:2008 (class B). It is fully CE marked with demand regulator SuperFlow 350 and oral nasals PN 510-690 and PN 510-747.

The minimum operating temperature recommended for the Kirby Morgan Commercial Diving Helmet 37SS is 37 degrees F only in regards to regulator performance. At the time of this writing no hot water shroud is available for the Kirby Morgan Commercial Diving Helmet 37SS for heating the commercial diver breathing gas. Without a hot water shroud the commercial diver may be subject to hypothermia due to cold gas inspiration temperatures. Kirby Morgan makes no physiological recommendations regarding minimum safe operating temperatures for commercial divers using this commercial diving helmet. Usually the greatest danger of demand regulator icing will be encountered on deck when the surrounding air temperature is less than 32 Degrees F (0 Degree C). This effect is primarily due to the refrigeration effect of breathing air pressure reduction and the addition of moisture from the divers exhalation coming in contact with the topside air temperature. Recommended overbottom (OB) gas supply pressure for best performance at depths are calculated by the formula (fsw x 0.445+14.7) + recommended p.s.i. g.